Cantilever Arm Shelf Systems
Cantilever Arm Shelf Systems
Console Arm Shelf Systems production project installation service
If you have a project in the field of Cantilever Arm Shelf Systems, please do not hesitate to contact us.
Cantilever Arm Shelf Systems
- Thin-walled, high-strength and smooth-surface products are created through the cold forming process applied to roll sheets of material grades ST37, ST44, ST52, S420 and S460.
- The bolts, which are of ISO 6.8, 8.8 and 10.8 quality and used during the assembly of the shelf elements, are tightened with torque-adjusted machines and checked to reach the appropriate tightening values with a torque meter.
- By using a welding robot, the welding strength is increased by annealing the products whose welding quality is increased and the penetration test is applied. With the penetration test, the best welding quality is achieved by testing their resistance to fractures and cracks in cases of sudden impact and loading.
- Static and dynamic analyzes of shelf elements are made with the SAP 2000 program. The cross-sections of these elements are in accordance with the regulations and specifications determined by the relevant country, such as Steel Shelf Standards (TS EN 16681, TS EN 15620, TS EN 15620, TS EN 15629, TS EN 15635), Turkish Earthquake Regulation, AISI Standard and Steel Specification. is determined accordingly.
- Durable, bright and smooth materials are obtained by electrostatic powder coating applied to ST37, ST44, ST52, S420 and S460 steels, or by preventing the materials from rusting by galvanizing (pregalvanizing, electro and dipping) method, the shelf life is increased.
- The mechanical or chemical anchoring method applied to the foundation is carried out in accordance with the regulations, preventing damage to the ground and ensuring the appropriate burial depth.
Cantilever Arm Shelf Systems
-Aisle distances can be adjusted according to material length and forklift dimensions.
-Thanks to the possibility of easy access to all floors and products, stock control can be easily done.
-Floor spacing can be adjusted as desired.
-Due to its continuous shelf system, products of different sizes can be easily stocked.
- The bolts, which are of ISO 6.8, 8.8 and 10.8 quality and used during the assembly of the shelf elements, are tightened with torque-adjusted machines and checked to reach the appropriate tightening values with a torque meter.
- By using a welding robot, the welding strength is increased by annealing the products whose welding quality is increased and the penetration test is applied. With the penetration test, the best welding quality is achieved by testing their resistance to fractures and cracks in cases of sudden impact and loading.
- Static and dynamic analyzes of shelf elements are made with the SAP 2000 program. The cross-sections of these elements are in accordance with the regulations and specifications determined by the relevant country, such as Steel Shelf Standards (TS EN 16681, TS EN 15620, TS EN 15620, TS EN 15629, TS EN 15635), Turkish Earthquake Regulation, AISI Standard and Steel Specification. is determined accordingly.
- Durable, bright and smooth materials are obtained by electrostatic powder coating applied to ST37, ST44, ST52, S420 and S460 steels, or by preventing the materials from rusting by galvanizing (pregalvanizing, electro and dipping) method, the shelf life is increased.
- The mechanical or chemical anchoring method applied to the foundation is carried out in accordance with the regulations, preventing damage to the ground and ensuring the appropriate burial depth.
